Chemisys Products
Aquabead Low VOC Water Repellent
Aquabead is an ultra violet (UV) stable waterborne water-repellant technology designed to optimize the three performance criteria essential in a high performance water repellent specifically formulated for wood. These are long term water beading, excellent liquid water exclusion to eliminate decay, and reduced water vapour transmission to improve dimensional stability and prevent warping and cracking. Additionally, regulatory and environmental requirements for reduced toxic emissions have been incorporated into this product, which has a volatile organic content (VOC) of less than 20 gm/litre and is water-soluble.
The significant benefits of the Aquabead can be summarized as:
- Does not change the physical appearance of the wood substrate
- Reduces warping and cracking due to dimensional changes in the wood
- Long life durability and protection for both interior and exterior timbers
- Wide variety of easy application methods
- Very low VOC and environmental toxicity
Cutek CD50® Wood Preservative
Cutek® Wood Preservative is a specially formulated oil timber preservative for interior & exterior use, that is designed to penetrate deeply into any species of timber, including hardwoods, to provide water repellency, and assist with dimensional stability
Cutek® Wood Preservative does not peel off or crack, but helps to control warping, cupping, and splitting; effectively enhancing the service life of timber. This characteristic ensures that future recoat preparation consists of a simple wash-down of the timber, rather than conventional sanding or stripping, resulting in significant savings in ongoing maintenance costs and time.
Cutek® Wood Preservative, is resistant to surface fungus and mould
Cutek® Wood Preservative is suitable for use as a clear, water repellent preservative coating on exterior timber surfaces, however the clear coated timber surface will lightly silver with age to produce a natural weathered appearance, while retaining its dimensional stability characteristics. If this natural silvering of the timber is undesirable, then colourtoned Cutek® Wood Preservative must be used to delay the silvering process in addition to maintaining and enhancing the natural colour of freshly oiled timber.
Cutek® Wood Preservative is suitable for use on weatherboards, shingles, board & batten, plywood, cane, log buildings, beams, outdoor furniture, deckings, fascia boards, shutters, garage doors, joinery, spa pools, fences, posts, ... in fact virtually anything made of wood.
Cutek® Wood Preservative can be easily applied by almost anyone.
CD77 SupaStrip
CD77 SupaStrip is a water soluble gel designed to remove multiple layers of latex paints, stains, varnishes, linseed oils and other film forming coatings that hide the original color and texture of wood. CD77 Stripper allows you to start over from the beginning, by restoring previously coated or greyed wood to a similar condition to new timber before application of non-film forming Cutek® Wood Preservative. CD77 Stripper is designed to restore timber without damaging the cell structure or interfering with future coatings on the newly stripped surface. CD77 Stripper also removes finishes from all types of surfaces, including masonry and metal.
SARA Clean
SARA Clean is designed as a cost effective, biodegradable cleaner for the restoration of uncoated, dirty and weathered timber. Saraclean is less powerful than WAO Stain Remover, however it is non hazardous, and will not damage substrates or vegetation adjacent to the timber surface being restored, eliminating the need for containment or masking.
SARA Clean is excellent as a pre recoat wash for timber previously coated with Cutek® Wood Preservative that is due to be recoated, because it effectively removes accumulated dirt and loose pigmentation from the surface fibres of the timber.
SARA Clean can also be used for the cleaning of dirt, grime, oxidised paint, mould, fungi, moss and decayed material from wood, tiles, bricks, fibrolite, paths, driveways etc.
TPS 475
TPS475 is a timber preservative and stabiliser that designed for production pre-coating of factory manufactured items such as natural timber garage doors and laminated beams. TPS 475 imparts exceptional long term dimensional stabilty to timber while assisting wood to maintain its modulus of elasticity
Please contact Chemisys for more information on this product.
WAO Stain Remover
WAO Stain Remover was developed because exterior wood surfaces including structures, shingle roofs, decks, and cladding become discoloured from dirt and general weathering and greying. WAO Stain Remover counteracts the weathering process by eliminating years of discoloration and fungus from all species of timber. It cleans, brightens and restores wood surfaces back to the appearance of new timber. Additionally, it is exceptional at removing stubborn stains such as tannin stains, resin stains, fungal and algae stains, green CCA stains, oil and grease stains, surface greying and many other chemical stains and discolourations that may destroy the natural beauty of wood.
CA100 Aqueous 100% Aliphatic Urethane
CA100 aqueous aliphatic urethane is a fast drying, low VOC, minimal yellowing, varnish that features excellent mar, scuff and chemical resistance, flexibility and impact resistance. CA100 is recommended for wood-floor and furniture finishes, and most interior timber substrates.
Qtrol Surface Cleaner
Qtrol Surface Cleaner is an economical, and unique combination of biodegradeable surfactants that target moss, mould, and general grime on any exterior surface. When diluted with water and applied, Qtrol starts to attack the contamination on the treated surface, and each time it rains, Qtrol reactivates to help flush the mould and grime away without damaging the substrate. Qtrol is easy to use as you only have to wet the contaminated surface and let nature do the rest.
.