To showcase the incredibly restoring power of CUTEK® Restore, we decided to apply it to a drab, weathered timber reclining chair. Note, this chair had not previously been coated with a CUTEK® protective wood oil. The chair was severely discoloured and moss and fungi had begun to take hold. We decided to apply CUTEK® Restore to only one side of the chair, allowing the restoring agent to clean and brighten the timber for 15 minutes before water blasting to clean.

The results speak for themselves:

Notice how the CUTEK® Restore easily removes the remnants of the fungi and moss from the surface of the timber. Not only is the timber cleaned, but it is restored. The natural beauty of the grain and the rich colour of the wood returns to its original appearance.

Next up: protect the timber with a clear coat of CUTEK® Wood Preservative to resist the damage of moisture, fungal decay, mould and termites. A simple, fast, cost effective process to ensure this chair has many more summers in service.

Do you have some outdoor timber furniture that needs a facelift? Be sure to drop into your local CUTEK® stockist to grab CUTEK® Restore and bring your old timber furniture back to life.

The post The restoring power of CUTEK® Restore appeared first on CUTEK® Timber Protection.

Exposure to sun, wind, salt, sand and ocean moisture can cause significant damage and result in premature failure of wooden decking boards.

With a close proximity to the sea, decking will need a high level of protection from the harsh elements to ensure longevity.

Removal of salt from the wood

Moist salt air can be a challenge for oceanside decking. Once salt finds its way into timber via cracks, salt crystals can form and grow. Over time they push the fibres of the timber out making it appear fuzzy.

Prevention includes frequent power rinsing to wash the salt off. Using CUTEK® Restore will ensure that all traces of salt are removed.

Seal regularly for longevity

After removing salt particles from the wood, the next step is to apply a protective coating.

Most coatings, deck stains and oils trap moisture and can be the cause of premature wood failure through rot and decay. CUTEK® Extreme CD50 penetrates the wood to protect from within and keep moisture out, including the salt air and sea-spray of a beachside location.

CUTEK® coatings never peel or flake but will need more regular recoats in a marine setting.

The professional’s choice

Architects, designers and engineers continue to use timber for coastal structures, including resorts and beachside clubs. They turn to CUTEK® Extreme CD50 for professional hard-wearing protection of installations against the elements.

Deck care is important. Regular cleaning, staining and coating with quality products will give oceanside decks the protection they need to withstand their harsh environment.

The post Maintaining an oceanside deck appeared first on CUTEK® Timber Protection.

With any type of hospitality, frequent use spills and accidents are inevitable and can stain or damage your deck or timber furniture. Now is a great time to learn how to clean decking and furniture in preparation for the entertaining season ahead.

1. Removing stains caused by food or drink spills

Food or drink spills can cause discolouration and stains that are hard to remove.

CUTEK® Quickclean is an industrial grade general purpose cleaner. It cuts through grease and stains and will generally be tough enough to clean up food and drink spills on tables, chairs or decking boards.

Apply the product liberally and leave it on the surface for 10 to 20 minutes. If the stain is stubborn it may be necessary to scrub it with a stiff fibre brush. If it still refuses to budge, try CUTEK® Restore  for a deeper cleanse.

When all traces of the stain are removed, the wood is ready for coating with CUTEK® Extreme CD50.

2. Restoring timber with black or grey discolouration

Greyness can be caused by significant weathering if a deck is particularly exposed. Metal objects left sitting on the deck for a prolonged period, such as nails or metal furniture can also cause grey or black stains.

An application of CUTEK® Restore will keep working for 24 hours to restore oxidized, grey timber while enhancing the grain.

After cleaning, the deck or furniture can be treated with CUTEK® Extreme CD50 to protect it from further moisture damage.

Adding a CUTEK® Colourtone  will enhance and maintain the freshly oiled natural look of your timber.

3. Removing and treating mould or fungus stains

Decks that are shaded are pre-disposed to issues with mould or fungus.  The problem often covers a large surface area.

Sweep the deck thoroughly with a stiff fibre brush, taking care to work into the corners where mould and fungus often build up.

CUTEK® Restore is a professional grade deck cleaning product that will eradicate traces of mould and fungus. It keeps working for up to 24 hours. Be sure to complete a patch test first to determine how long to leave it on.

Although CUTEK® Restore is not considered a strong defoliant, take care to protect adjacent vegetation before you begin.

Using the right products is an essential component for cleaning up and treating timber stains or damaged wood. All traces of the issues can be removed from decking and furniture resulting in a fresh, as-new look to your outdoor entertaining space.

The post How to Clean Timber Deck Stains appeared first on CUTEK® Timber Protection.

The timber needs proper preparation before finishing with a heavy-duty product that will withstand ongoing exposure.

Common reasons for peeling:

• The deck wasn’t properly prepared; poor preparation can stop the oil from penetrating and means that it fails to protect the wood.
• The wrong type of stain or sealer was used; a heavy duty exterior deck oil is required to withstand exposure to the elements.
• An inferior quality decking stain was used.
• Too much stain was applied, or the coats were too thick and not allowed to dry between applications.

How to fix and prevent future peeling

In just 3 steps you’ll have the job done and ensure that your timber deck is protected for years to come.

1. Remove the weathered, peeling layers

The first step is to remove all traces of the peeling deck coating and take the timber back to bare wood by stripping or sanding it.

After stripping or sanding the wood, CUTEK® Wood Stripper will remove the final traces of its previous coating.

Depending on the state of the wood, it may be possible to use CUTEK® Wood Stripper without sanding.

Tip: As you scrape the wood, reset any nails or screws that stick out from the surface.

2. Clean and rinse the wood

Once stripped, the wood will need a good restoring scrub. CUTEK® Restore restoration agent will remove the residue from the stripping process. Once applied, a power rinse with a high-pressure washer will be necessary.

Tip: Use a lower setting to avoid damaging the wood fibre.

3. Seal the wood

The final step is to finish with two coats of a hard wearing timber deck oil that will excel in the most challenging of environments, such as CUTEK® Extreme CD50. Each coat must be applied evenly with brush, paintpad or roller.

When using a CUTEK® Colourtone, it is essential that the oil is stirred frequently and applied in thin coats. The wood must feel completely dry and non-greasy before application of the second coat.

Tip: After stripping and cleaning the wood, apply the finish as soon as possible to avoid unnecessary exposure to the elements.

The CUTEK® difference

Treating timber upon installation can prevent the occurrence of peeling deck stain. CUTEK® oil penetrates the timber to protect it from the inside out. Where other coatings envelope the wood, CUTEK® Extreme CD50 deeply diffuses into the timber. It lasts longer in tougher climates and won’t peel like other products.

Contact us for more advice on how to seal wood utilising CUTEK®’s wood finishing range.

The post Why is my deck stain peeling? How to fix and prevent it appeared first on CUTEK® Timber Protection.