To showcase the incredibly restoring power of CUTEK® Restore, we decided to apply it to a drab, weathered timber reclining chair. Note, this chair had not previously been coated with a CUTEK® protective wood oil. The chair was severely discoloured and moss and fungi had begun to take hold. We decided to apply CUTEK® Restore to only one side of the chair, allowing the restoring agent to clean and brighten the timber for 15 minutes before water blasting to clean.

The results speak for themselves:

Notice how the CUTEK® Restore easily removes the remnants of the fungi and moss from the surface of the timber. Not only is the timber cleaned, but it is restored. The natural beauty of the grain and the rich colour of the wood returns to its original appearance.

Next up: protect the timber with a clear coat of CUTEK® Wood Preservative to resist the damage of moisture, fungal decay, mould and termites. A simple, fast, cost effective process to ensure this chair has many more summers in service.

Do you have some outdoor timber furniture that needs a facelift? Be sure to drop into your local CUTEK® stockist to grab CUTEK® Restore and bring your old timber furniture back to life.

The post The restoring power of CUTEK® Restore appeared first on CUTEK® Timber Protection.

Exposure to sun, wind, salt, sand and ocean moisture can cause significant damage and result in premature failure of wooden decking boards.

With a close proximity to the sea, decking will need a high level of protection from the harsh elements to ensure longevity.

Removal of salt from the wood

Moist salt air can be a challenge for oceanside decking. Once salt finds its way into timber via cracks, salt crystals can form and grow. Over time they push the fibres of the timber out making it appear fuzzy.

Prevention includes frequent power rinsing to wash the salt off. Using CUTEK® Restore will ensure that all traces of salt are removed.

Seal regularly for longevity

After removing salt particles from the wood, the next step is to apply a protective coating.

Most coatings, deck stains and oils trap moisture and can be the cause of premature wood failure through rot and decay. CUTEK® Extreme CD50 penetrates the wood to protect from within and keep moisture out, including the salt air and sea-spray of a beachside location.

CUTEK® coatings never peel or flake but will need more regular recoats in a marine setting.

The professional’s choice

Architects, designers and engineers continue to use timber for coastal structures, including resorts and beachside clubs. They turn to CUTEK® Extreme CD50 for professional hard-wearing protection of installations against the elements.

Deck care is important. Regular cleaning, staining and coating with quality products will give oceanside decks the protection they need to withstand their harsh environment.

The post Maintaining an oceanside deck appeared first on CUTEK® Timber Protection.

If your deck is in disrepair, follow these simple steps to restoring it to be enjoyed for years to come. For best results, choose a warm, dry spell to undergo your timber restoration.

1. Assess the deck

First, check that the deck is structurally sound. Look out for loose, damaged, split, warped or rotten boards and make a list of what needs replacing before heading to your local hardware.

Top tip: Be sure to include balustrades and steps in your pre-timber repair assessment.

2. Replace damaged boards

When replacing boards, it is important to use the same wood profile. Directly replacing old decking boards with the odd new one can look unsightly, so it might make sense to move the boards around. Replacing visible boards with existing boards on the outside of the deck and laying new boards at the edge can make a difference to the finished effect.

Top tip: Remember to use decking-specific nails to avoid timber splitting in wood repair.

3. Clean the decking

Give the deck a good once over with a broom then follow up with a clean.

To remove grease and grime use powerful outdoor cleaner CUTEK® Quickclean.  A deep clean may also be necessary in preparation for oiling. CUTEK® Restore is a professional grade wood restoration product that will remove stubborn stains and address oxidization to restore wood to look like new.

Top tip: Visit cutek.com.au to identify the right cleaning solution for your project using the Project Planner.

4. Strip the decking

It may also be necessary to sand or strip the deck to remove all existing wood coatings to allow the deep penetration of CUTEK® to ensure that the wood is prepared right back to the raw material.

CUTEK® Wood Stripper is a safe, mild and effective coating and paint stripper. It is suitable for removing multiple layers of wood coatings such as latex paints, stains, varnishes, linseed oils, acrylics and other film forming coatings.

It’s the smart alternative to conventional strippers that use dangerous chemicals.

5. Apply deck oil

High quality oil will ensure that your deck is fully restored to its former glory. What’s is best is the CUTEK® oil will also protect the deck from the inside and out. Your tired deck may need up to 3 coats to achieve the desired look.

You may consider adding a Colourtone to clear oil. There are 16 different tones available from CUTEK®, each has been specifically developed to closely match popular wood species. Adding a Colourtone is highly recommended for decks that were in bad disrepair with several boards replaced.

Top tip: Where possible, each coat is best applied at the same time to allow it to dry evenly.

How long it takes for timber deck restoration depends on its initial state. Once you’ve assessed the work involved and sourced your materials it could be possible to get the majority of your makeover finished in a day. However, you may find you need to apply second or third coats of deck oil on subsequent days.

Talk to us about how CUTEK®’s range of cleaning products and protective oils can help you to revive your tired deck in time for Summer.

The post Five Steps to Reviving a Tired Timber Deck appeared first on CUTEK® Timber Protection.