Products

Solution:

Choose either Cutek CD50 or Cutek Extreme. For best results timber should be cleaned first with Proclean to remove dirt and iron stains

Solution:

Only use Cutek Extreme. For best results engineered wood should be cleaned first with Cutek QuickClean to remove construction dirt.

Solution:

Choose either Cutek CD50 or Cutek Extreme. For best results timber should be cleaned first with Cutek Proclean to remove dirt and iron stains.

Solution:

Only use Cutek Extreme. For best results engineered wood should be cleaned first with Cutek QuickClean to remove construction dirt.

Solution:

• Use Cutek Proclean, follow ‘how to use’ instructions, then apply two coats of Cutek CD50 or Cutek Extreme.

Solution:

Previous coating must be completely removed by sanding, or stripping with Cutek CD33 Naked, and cleaned using Cutek Proclean, following ‘how to use’ instructions. Apply two coats of Cutek CD50 or Cutek Extreme.

Solution:

Use Cutek Proclean, follow ‘how to use’ instructions, then apply two coats of Cutek Extreme.

Solution:

Previous coating must be completely removed by sanding, or stripping with Cutek CD33 Naked, and cleaned using Cutek Proclean, following ‘how to use’ instructions. Apply two coats of Cutek Extreme.

Solution:

Clean with Cutek QuickClean. Coat with Cutek CD50 or Cutek Extreme.

Solution:

Use Cutek Proclean, follow ‘how to use’ instructions, then apply two coats of Cutek CD50 or Cutek Extreme.

Solution:

Cutek CD33 Naked, Cutek Proclean, Cutek CD50, Cutek Extreme

Solution:

Clean with Cutek QuickClean, coat with Cutek Extreme only.

Solution:

Use Cutek Proclean, follow ‘how to use’ instructions, then apply two coats of Cutek Extreme.

Solution:

Previous coating must be completely removed by sanding, or stripping with Cutek CD33 Naked, and cleaned using Cutek Proclean, following ‘how to use’ instructions. Apply two coats of Cutek Extreme.

Solution:

Use Cutek Proclean, follow ‘how to use’ instructions, then apply two coats of Cutek CD50 or Cutek Extreme.

Solution:

Previous coating must be completely removed by sanding or stripping with Cutek CD33 Naked, then use Cutek Proclean, follow ‘how to use’ instructions, then apply two coats of Cutek CD50 or Cutek Extreme.

Solution:

Use Cutek Proclean, follow ‘how to use’ instructions, then apply two coats of Cutek Extreme.

Solution:

Previous coating must be completely removed by sanding, or stripping with Cutek CD33 Naked, and cleaned using Cutek Proclean, following ‘how to use’ instructions. Apply two coats of Cutek Extreme.